KTM 350 EXC-F 2015 Owner'S Manual Download

Page: 44 / 122

TUNING THE CHASSIS

Info

Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.

11.4

Adjusting the high-speed compression damping of the shock absorber

Caution

Danger of accidents

Disassembly of pressurized parts can lead to injury.

–

The shock absorber is filled with high density nitrogen. Adhere to the description provided. (Your authorized KTM workshop
will be glad to help.)

Info

The high-speed setting can be seen during the fast compression of the shock absorber.

L02472-11

–

Turn adjusting screw



all the way clockwise with a socket wrench.

Info

Do not loosen nut



–

Turn counterclockwise by the number of turns corresponding to the shock absorber
type.
Guideline

Compression damping, high-speed

Comfort

2 turns

Standard

1.5 turns

Sport

1.25 turns

Info

Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.

11.5

Adjusting the rebound damping of the shock absorber

Caution

Danger of accidents

Disassembly of pressurized parts can lead to injury.

–

The shock absorber is filled with high density nitrogen. Adhere to the description provided. (Your authorized KTM workshop
will be glad to help.)

101315-10

–

Turn adjusting screw



clockwise up to the last perceptible click.

Info

Do not loosen nut



–

Turn counterclockwise by the number of clicks corresponding to the shock absorber
type.
Guideline

Rebound damping

Comfort

28 clicks

Standard

24 clicks

Sport

22 clicks

Info

Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.

Summary of Contents for 350 EXC-F 2015



























































































































Search results

Summary of Contents for 350 EXC-F 2015

Reviews:

Related manuals for 350 EXC-F 2015

Brands by name

Popular brands

KTM 350 EXC-F 2015, Owner'S Manual

Search results

Summary of Contents for 350 EXC-F 2015

Reviews:

Related manuals for 350 EXC-F 2015

Brands by name

Popular brands