KTM 350 EXC-F 2015, Owner'S Manual

Page: 112 / 122

23 TECHNICAL DATA
110
23.8 Shock absorber
Shock absorber part number 12.18.7L.67
Shock absorber WP Suspension PDS 5018 DCC
Compression damping, low-speed
Comfort 25 clicks
Standard 20 clicks
Sport 15 clicks
Compression damping, high-speed
Comfort 2 turns
Standard 1.5 turns
Sport 1.25 turns
Rebound damping
Comfort 28 clicks
Standard 24 clicks
Sport 22 clicks
Spring preload 8 mm (0.31 in)
Spring rate
Weight of rider: 65… 75 kg (143… 165 lb.) 66 N/mm (377 lb/in)
Weight of rider: 75… 85 kg (165… 187 lb.) 69 N/mm (394 lb/in)
Weight of rider: 85… 95 kg (187… 209 lb.) 72 N/mm (411 lb/in)
Spring length 250 mm (9.84 in)
Gas pressure 10 bar (145 psi)
Static sag 33… 35 mm (1.3… 1.38 in)
Riding sag 105… 115 mm (4.13… 4.53 in)
Fitted length 417 mm (16.42 in)
Damper oil Shock absorber fluid (SAE 2.5) (50180751S1) ( p. 113)
23.9 Chassis tightening torques
Screw, pressure regulator EJOT PT ® K60x25
‑
Z 3 Nm (2.2 lbf ft)
–
Spoke nipple, front wheel M4.5 6 Nm (4.4 lbf ft)
–
Spoke nipple, rear wheel M4.5 6 Nm (4.4 lbf ft)
–
Screw, battery terminal M5 2.5 Nm (1.84 lbf ft)
–
Screw, intake air temperature sensor M5 2 Nm (1.5 lbf ft)
–
Screw, shock absorber adjusting ring M5 5 Nm (3.7 lbf ft)
–
Screw, spoiler on fuel tank M5x12 1.5 Nm (1.11 lbf ft)
–
Nut, cable on starter motor M6 4 Nm (3 lbf ft)
–
Remaining nuts, chassis M6 10 Nm (7.4 lbf ft)
–
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Screw, ball joint of push rod on foot
brake cylinder M6 10 Nm (7.4 lbf ft) Loctite ® 243™
Screw, chain sliding guard M6 6 Nm (4.4 lbf ft) Loctite ® 243™
Screw, front brake disc M6 14 Nm (10.3 lbf ft) Loctite ® 243™
Screw, rear brake disc M6 14 Nm (10.3 lbf ft) Loctite ® 243™
Screw, throttle grip M6 5 Nm (3.7 lbf ft)
–
Fuel connection on fuel pump M8 10 Nm (7.4 lbf ft)
–
Nut, foot brake lever stop M8 20 Nm (14.8 lbf ft)
–
Nut, rear sprocket screw M8 35 Nm (25.8 lbf ft) Loctite ® 2701™
Nut, rim lock M8 12 Nm (8.9 lbf ft)
–
Remaining nuts, chassis M8 25 Nm (18.4 lbf ft)
–
Remaining screws, chassis M8 25 Nm (18.4 lbf ft)
–
Screw, bottom triple clamp M8 15 Nm (11.1 lbf ft)
–