KTM 350 EXC-F 2015, Owner'S Manual, Page: 91 / 122

15 ELECTRICAL SYSTEM
89
15.11 Changing the turn signal bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
101723-10
Main work
–
Remove the screw and carefully remove diffuser

.
–
Press the turn signal bulb

carefully into the socket, turn it counterclockwise by
about 30°, and take it out of the socket.
Info
Do not touch the reflector with your fingers, and keep it free from grease.
–
Press the new turn signal bulb carefully into the socket and turn it clockwise until
it stops.
Turn signal (RY10W / socket BAU15s) ( p. 109)
–
Position the diffuser.
–
Insert the screw and first turn it counterclockwise until it engages in the thread.
Tighten the screw slightly.
Finishing work
–
Check that the turn signal system is functioning properly.
15.12 Changing the speedometer battery
Preparatory work
–
Remove the headlight mask with the headlight.
M00191-10
Main work
–
Remove screws

.
–
Pull the speedometer upward out of the holder.
M00192-10
–
Using a coin, turn protection cap

all the way counterclockwise and remove it.
–
Remove speedometer battery

.
–
Insert the new battery with the label facing upward.
Speedometer battery (CR 2430) ( p. 109)
–
Check the O-ring of the protection cap for correct seating.