KTM 350 EXC-F 2015, Owner'S Manual

Page: 52 / 122

12 SERVICE WORK ON THE CHASSIS
50
M00163-10
–
Release screws

. Take out the left fork leg.
–
Release screws

. Take out the right fork leg.
12.8 Installing the fork legs
x
M00164-10
Main work
–
Position the fork legs.
Bleeder screws

are positioned toward the front.
Info
Grooves are milled into the side of the upper end of the fork legs. The sec-
ond milled groove (from the top) must be flush with the top edge of the
upper triple clamp.
M00163-11
–
Tighten screws  .
Guideline
Screw, top triple clamp M8 20 Nm
(14.8 lbf ft)
–
Tighten screws

.
Guideline
Screw, bottom triple clamp M8 15 Nm
(11.1 lbf ft)
M00234-10
–
Position the brake caliper and mount and tighten screws  .
Guideline
Screw, front brake caliper M8 25 Nm
(18.4 lbf ft) Loctite ® 243™
–
Mount cable binder.
–
Position the brake line, wiring harness, and clamp. Mount and tighten screws

.
Finishing work
–
Install the front wheel.
x
( p. 78)
–
Refit the headlight mask with the headlight.
–
Check the headlight setting. ( p. 88)
12.9 Removing the fork protector
x
Preparatory work
–
Remove the headlight mask with the headlight.
–
Raise the motorcycle with the lift stand. ( p. 48)
–
Remove the front wheel. x ( p. 78)
–
Remove the fork legs.
x
( p. 49)