Changing The Can-Am Spyder RT Windshield
1 of 3
Step 1:
Before shutting down engine, raise windshield to highest point.
Step 2:
Remove T-25 Torx bolts from back side of
windshield bracket. These are the fasteners that
hold the windshield trim pieces on. Place bolts on
seat with T-25 Torx tool.
Remove trim pieces by slightly pulling top of trim
out from windshield and moving trim piece
downward. This will release the trim piece from the
windshield. Lay on seat, left and right side noted.
TIP: Place a playing card (or something
similar) between the bottom point of the trim
piece and the windshield. This will prevent
the tip of the trim piece from gouging the
windshield when the trim piece is removed.
Step 3:
Remove T-30 Torx mounting bolts (a second set of
hands will be very useful) and remove windshield.
