ENGLISH
8
9
10
11
4
5
6
4
6
5
3
7
8
1
2
12
Scope of delivery:
1x cylinder-head bolt M5x16
(1)
1x oval head screw M5x20
(2)
1x range change metal nut M5
(3)
69008021080
1x sensor box fixing bracket
(4)
69034081010
1x shift shaft adapter piece
(5)
69034081015
1x retaining plate for ON/OFF switch
(6)
69034081020
1x foam 70x85x5mm
(7)
69034081025
1x cable tie 300/4.8mm
(8)
44011076305
1x cable2
(12)
69034081030
Preparations
- Jack up the motorcycle.
NOTE: A rear wheel lifting device (610.29.055.400) available from KTM
with the universal V-adapter (610.29.055.120) is recommended.
- Remove the seat.
- Remove the tank.
- Remove the left and right radiator shrouds.
- Remove the left and right exhaust ducts.
- Remove the left and right rear fairing.
- Remove the top left and right front fairing.
- Remove the bottom left and right front fairing.
- Remove the left and right intake snorkels.
- Remove the headlight.
- Remove the top section of the filter box.
Assembly
- Remove screws
(9)
and
(10)
, position the sensor box fixing bracket
(4)
and mount original screws
(9)
and
(10)
again.
- Remove screw
(11)
, position the shift shaft adapter piece
(5)
and mount
original screw
(11)
again (Loctite 243).
- Position the range change metal nut
(6)
on the shift shaft adapter piece.
