KSI SC Pro, Owner'S/Operator'S Manual

Page: 28 / 49

24
KSi SC PRO APPLICATOR
USER'S MANUAL
SMX Conveyor
At the tail of the SMX conveyor, there are a few access doors that can be
removed to inspect / access some the tail of the conveyor. The image to
the right shows the three difference access doors, with the middle one
having the door removed.
The SMX Conveyor can also be setup with a collapsible hopper, and in
this case, there is complete access to inlet of the conveyor, without having
to remove any doors under the atomizer.
The mixing baffles can be also accessed by removing the 4 pins from
each cover on top of the conveyor. This will expose a door with a
couple of mixing baffles on each door.
These doors can be removed so that the mixing baffles can be
washed / cleaned.
Each door is marked with a number that correlates to its location on
the conveyor. When putting the doors back on the conveyor, ensure
that each door matches the number that is on the conveyor.
The conveyor can be cleaned out by opening the cleanout section on the tail of the conveyor and vacuuming
any seeds or buildup that has accumulated at that point.