KSB Etanorm-R, Installation & Operating Manual

Page: 71 / 78

9 Related Documents
71 of 78
Etanorm-R
1222.8/13-EN
Fig. 31: a) Etanorm-R (single-entry) b) Etanorm-R (two-stage) c) Clamped casing cover
27)
Table 29: List of components
Part No. Part No. Description
102 102 Volute casing
411.01/.03/.04/.08 Joint ring
502.01 Casing wear ring
902.01 Stud
903.01/.03/.04/.08 Screw plug
920.01 Nut
161 161 Casing cover
400.19 Gasket
502.02 Casing wear ring
901.30 Hexagon head bolt
902.04 Stud
920.01/.04 Hexagon nut
171
28)
171 With diffuser
183 183 Support foot
901.04 Hexagon head bolt
550.41 Disc
210 210 Shaft
940.01/.02 Key
230 230 Impeller
230.01/.02 230.01/.02 Impeller
321.01/.02 321.01/.02 Deep groove ball bearing
330 330 Bearing bracket
330 330 Bearing bracket
210 Shaft
312.01/.02 Deep groove ball bearing
360.01/.02 Bearing cover
400.01/.02 Gasket
411.77/.78 V-ring
500.18/.21 Ring
507 Thrower
550.74 Disc
731.04
29)
Pipe union
901.01/.02/.14/.31 Hexagon head bolt
81-92 Cover plate
922 Impeller nut
940.01/.02 Key
360.01/.02 360.01/.02 Bearing cover
400.01/.02 Gasket
901.01/.02 Hexagon head bolt
400.01/.02/.04/.19 400.01/.02/.04/.19 Gasket
411.01/.03/.04/.08/.62 411.01/.03/.04/.08/.62
28)
Joint ring
411.77/.78 411.77/.78 V-ring
412.47
28)
412.47 O-ring
27
On sizes 200-250, 200-260, 200-330, 250-300, 250-330 only
28 On size 125-500/2 only
29 For oil lubrication only