KSB Etanorm-R, Installation & Operating Manual

Page: 64 / 78

7 Servicing/Maintenance
64 of 78
Etanorm-R
1222.8/13-EN
7.5.6 Mounting the motor
NOTE
Steps 1 and 2 do not apply to versions with spacer-type coupling.
1. Shift the motor to connect it to the pump via the coupling.
2. Fasten the motor to the baseplate.
3. Align pump and motor. ( ð Section 5.7, Page 29)
4. Connect the motor to the power supply (refer to manufacturer's product
literature).
7.6 Tightening torques
7.6.1 Tightening torques for the pump
920.01
922
901.04
920.04
920.02
901.01
901.02
Fig. 29: Tightening points at the pump
Table 24: Tightening torques
Part No. Description Thread Tightening torques
18)
[Nm]
901.01/.02 Hexagon head bolt M12 30
901.04 Hexagon head bolt M16 75
920.01 Hexagon nut M16 120
M20 240
920.02 Hexagon nut M16 75
19)
922 Hexagon nut M20 × 1,5 200
M24 × 1,5 500
18 For unlubricated threads
19 Seal cover only