background image

2 Safety

8 of 34

Deep Lift System

2553.89/04-EN

2.5 Safety awareness

In addition to the safety information contained in this operating manual and the
intended use, the following safety regulations shall be complied with:

Accident prevention, health regulations and safety regulations

Explosion protection regulations

Safety regulations for handling hazardous substances

Applicable standards, directives and laws

2.6 Safety information for the user/operator

Provide the personnel with protective equipment and make sure it is used.

Contain any residues of hazardous fluids (e.g. explosive, toxic, hot) so as to avoid
any danger to persons and the environment. Observe all legal requirements.

2.7 Safety information for maintenance, inspection and installation

Modifications or alterations of the product are only permitted with the
manufacturer's prior consent.

Use only original spare parts or parts/components authorised by the
manufacturer. The use of other parts/components can invalidate any liability of
the manufacturer for resulting damage.

The operator ensures that maintenance, inspection and installation are
performed by authorised, qualified specialist personnel who are thoroughly
familiar with the manual.

Carry out all work at the product in the designated work area.

The product must have cooled down to ambient temperature.

Decontaminate products which have been used in fluids posing a health hazard.

2.8 Unauthorised modes of operation

Never operate the product outside the limits stated in the data sheet and in this
manual.

The warranty relating to the operating reliability and safety of the product supplied
is only valid if the product is used in accordance with its intended use.

Summary of Contents for Deep Lift System



































Reviews: