KSB Deep Lift System, Installation & Operating Manual

Page: 19 / 34

5 Operation
19 of 34
Deep Lift System
2553.89/04-EN
5.3 Pulling out the pump set
Attaching the spring
WARNING
Risk of injury from spring under tension and moving parts
Risk of shearing and crushing injuries!
▷
Prior to removing spring 950, secure hook 59-18 in closed position with a
suitable tool (e.g. rod/manipulator).
59-18
a) b)
950
900
594
Fig. 7: Fitting the spring a) closed position b) open position
ü Hook 59-18 without fitted spring 950 is in open position.
1. Use a suitable tool to secure hook 59-18 in closed position.
2. Attach the carabine hooks of spring 950 to support frame 594 and to
eyebolt 900 of hook 59-18.
3. Remove the tools used.
ð Spring 950 secures hook 59-18 in closed position.
CAUTION
Spring defective or contaminated
Risk of adverse affect on the function of the lifting accessory!
▷ Clean spring 950 to remove any contamination.
▷
Check that spring 950 secures hook 59-18 in closed position.
▷ If the spring has been overstretched, replace it by a new one.
Fitting the connection pipe, weights and guide piece
DANGER
Falling parts
Injury from falling parts!
▷ Check that the fastening screws/bolts are tightened and lock them with suitable
means.
▷ Check that the connection pipe, weights and guide piece are fitted properly
and seated firmly.
▷ Wear personal protective equipment.
▷ Observe the applicable local accident prevention regulations.