1 General
7 of 116
CHTRa
1 General
1.1 Principles
This operating manual is valid for the type series and variants indicated on the front
cover.
The manual describes the proper and safe use of this equipment in all phases of
operation.
The name plate indicates the type series and size, the main operating data, the order
number and the order item number. The order number and order item number
clearly identify the pump set and serve as identification for all further business
processes.
KSB specialist personnel must be called in for installation, commissioning/start-up and
maintenance. KSB will only assume responsibility for faultless execution of the work
and for the safety of the personnel involved if dismantling/reassembly and
maintenance have been performed by KSB’s specialist team.
In the event of damage, immediately contact your nearest KSB Service centre to
maintain the right to claim under warranty.
1.2 Installation of partly completed machinery
To install partly completed machinery supplied by KSB refer to the sub-sections under
Servicing/Maintenance.
1.3 Target group
This operating manual is aimed at the target group of trained and qualified specialist
technical personnel. (
1.4 Other applicable documents
In addition to this installation/operating manual, it is important to observe further
product-specific information and technical documents of the other pump set
components. Depending on the scope of supply the following documents are
available:
▪
Data sheet
▪
General arrangement drawing
▪
Excerpt from DIN 1045
▪
List of measuring points
▪
Tightening torques
▪
P&I diagram
▪
List of valves
▪
Table of weights
▪
Clearances
▪
General drawings/Drawings for assembly
▪
Product literature on the coupling
▪
Product literature on the drive
▪
Product literature on the minimum flow system and minimum flow valve
▪
Minimum flow diagram
▪
Product literature on the valves and equipment
▪
Product literature on the instruments
▪
Product literature on the gear or variable speed coupling
