manualshive.com logo in svg

Krone Swadro TS 620, Original Operating Instructions

Share
Download
Krone Swadro TS 620 Original Operating Instructions Download Page 81

 

Operation

 

81 

 

Pos: 38.17.1 /Überschriften/Überschriften 2/U-Z/VVorderes Schwadtuch einstellen @ 153\mod_1363178249986_78.docx @ 1362482 @ 2 @ 1 

 

10.6 

Setting Front Swath Cloth  

Pos: 38.17.2 /BA/Bedienung /Schwader/Optional bei Ausführung Twin @ 236\mod_1394442911473_78.docx @ 1871044 @  @ 1 

 

Optional with Twin design 

Pos: 38.17.3 /BA/Bedienung /Schwader/Schwadtuch/Vorderes Schwadtuch einstellen_Text_SW 808-1, 810-1, 850 @ 152\mod_1362744621840_78.docx @ 1358151 @  @ 1 

 

The position of the front swath cloth (1) must be set depending on whether the machine is set 
for single swathing or double swathing. 
For single swathing, the front swath cloth must be swivelled up. 
For double swathing, the front swath cloth must be swivelled down. 
 

Pos: 38.17.4 /BA/Bedienung /Schwader/SchwadtuchAchtung - Kollision von Zinkenarmen und Schwadtuch @ 481\mod_1475736727429_78.docx @ 3243865 @  @ 1 

 

 

CAUTION! 

Damage to swath cloth and tine arms due to collision of swath cloth and tine arms 
• 

For single swath placement, swivel up the front swath cloth into the transport position. 

 

Pos: 38.17.5 /BA/Bedienung /Schwader/Schwadtuch/Vorderes Schwadtuch einstellen_Bild_SW 808-1, 810-1, 850 @ 156\mod_1363938309917_78.docx @ 1379692 @  @ 1 

 

SW9070084

2

1

4

4

3

1

4

3

3

 

Fig. 44 

Pos: 38.17.6 /Überschriften/Überschriften 3/U-Z/Vorderes Schwadtuch herunterschwenken_SW 808-1, 810-1, 850 @ 153\mod_1363180346531_78.docx @ 1362683 @ 3 @ 1 

 

10.6.1 

Swivelling Down Front Swath Cloth 

Pos: 38.17.7 /BA/Bedienung /Schwader/SchwadtuchVorderes Schwadtuch einstellen_Arbeitsstellung_SW 808-1, 810-1, 850 @ 310\mod_1418126592394_78.docx @ 2404375 @  @ 1 

 

The front swath cloth (1) must be moved to the working position if the machine is set for double 
swathing. 
• 

Pull the locking bolt (2). 

• 

Swivel swath cloth down until the locking bolt engages in the fastening hole (3). 

 

Pos: 38.17.8 /Überschriften/Überschriften 3/U-Z/Vorderes Schwadtuch hochschwenken_SW 808-1, 810-1, 850 @ 153\mod_1363180343234_78.docx @ 1362624 @ 3 @ 1 

 

10.6.2 

Swivelling up Front Swath Cloth 

Pos: 38.17.9 /BA/Bedienung /Schwader/SchwadtuchVorderes Schwadtuch einstellen_Transportstellung_SW 808-1, 810-1, 850 @ 310\mod_1418127504942_78.docx @ 2404406 @  @ 1 

 

If the machine is set for single swath placement or for transport, the front swath cloth (1) must 
be moved into transport position. 
• 

Pull the locking bolt (2). 

• 

Swivel swath cloth upward until the locking bolt engages in the fastening hole (4). 

Pos: 38.18 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TS 620





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands