manualshive.com logo in svg

Krone Swadro TS 620, Original Operating Instructions

Share
Download
Krone Swadro TS 620 Original Operating Instructions Download Page 75

 

Operation

 

75 

 

Pos: 38.9.1 /Überschriften/Überschriften 2/A-E/AAuslegearme in Arbeitsstellung absenken @ 303\mod_1414129704864_78.docx @ 2356706 @ 2 @ 1 

 

10.2 

Lowering Outrigger Arms into Working Position  

Pos: 38.9.2 /BA/Sicherheit/7. Gefahrenhinweise alt/SchwaderGefahr Maschine absenken (2017-06-07 15:02:36) @ 5\mod_1213694805078_78.docx @ 88774 @  @ 1 

 

 

Danger! – Lowering the machine into working position 

Danger to life, injuries or damage to the machine. 
• 

Lower the machine only when you are absolutely sure that neither persons, animals nor 
objects are in the swivel range of the machine. 

• 

Switch the PTO on only when the machine is in working position, the collapsible tine arms 
are swivelled into the working position and the hoop guards are turned downwards. 

 

Pos: 38.9.3 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Kreiselarme senken_Bild_SW 807-1 bis 810-1, 850, 907-1 @ 149\mod_1361516560140_78.docx @ 1331955 @  @ 1 

 

1

2

SW9070063

Fig. 38 
 

Pos: 38.9.4 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Kreiselarme senken_Text_SW 807-1 bis 810-1, 850, 907-1 @ 156\mod_1363942857857_78.docx @ 1380110 @  @ 1 

 

• 

Turn on the tractor. 

• 

To release the lockings (1), actuate the single-acting control unit on the tractor and apply 
pressure to the hydraulic cylinders. 

• 

To release the locking (1), pull on the 

actuating rope (2) and hold it under tension. 

• 

Actuate the single-acting control unit to lower the rotors until the wheels of the rotor running 
gear are on the ground. 

• 

Release the actuating rope (2). 

• 

Turn off the tractor and secure it against the possibility of rolling back. 

 

Pos: 38.9.5 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Hinweis Schwadtuch beim Absenken in Arbeitsstellung und erhöhter Schwenkbereich @ 152\mod_1362653861707_78.docx @ 1355634 @  @ 1 

 

 

Note 

Please take note that the swath cloth swivels automatically into working position when lowering 
the rotors and that it requires an increased swivel range. 

 

Pos: 38.10 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TS 620





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands