manualshive.com logo in svg

Krone Swadro TS 620, Original Operating Instructions

Share
Download
Krone Swadro TS 620 Original Operating Instructions Download Page 101

 

Settings

 

101 

 

Pos: 40.16.1 /Überschriften/Überschriften 2/F-J/HHöhe der Vorgewendestellung einstellen @ 243\mod_1395741004513_78.docx @ 1906475 @ 2 @ 1 

 

11.5 

Setting the Height of the Headland Position  

Pos: 40.16.2 /BA/Einstellungen/Schwader/Höhe der Vorgewendestellung einstellen Seitenschwader_Einleitung @ 244\mod_1395757694093_78.docx @ 1907411 @  @ 1 

 

The height of the both rotors in headland position is set via timing discs. 
On the front rotor, the setting is made via the rear timing disc. 

Pos: 40.16.3 /Layout Module /----------------Leerzeile-------------------- @ 240\mod_1395147357027_0.docx @ 1890988 @  @ 1 

 

 

Pos: 40.16.4 /Überschriften/Zwischenüberschriften/U-ZVorderer Kreisel @ 244\mod_1395757001698_78.docx @ 1907293 @  @ 1 

 

Front rotor 

Pos: 40.16.5 /BA/Einstellungen/Schwader/Höhe der Vorgewendestellung einstellen Seitenschwader_Vorderer Kreisel_Bild @ 243\mod_1395735899572_78.docx @ 1905884 @  @ 1 

 

2

SW9070126

Fig. 59 

Pos: 40.16.6 /BA/Einstellungen/Schwader/Höhe der Vorgewendestellung einstellen Seitenschwader_Vorderer Kreisel_Text @ 244\mod_1395756909787_78.docx @ 1907264 @  @ 1 

 

The height of headland position is set by adjusting the timing disc (2). 
To do this: 
• 

Loosen the screws on the timing disc (2). 

• 

Move timing disc in the oblong holes. 

Moving the timing disc clockwise: greater height of the swing outriggers in headland 
position. 
Moving timing disc anti-clockwise: lower height of the swing outriggers in headland 
position. 

Pos: 40.16.7 /Überschriften/Zwischenüberschriften/F-JHinterer Kreisel @ 244\mod_1395757042042_78.docx @ 1907352 @  @ 1 

 

Rear rotor 

Pos: 40.16.8 /BA/Einstellungen/Schwader/Höhe der Vorgewendestellung einstellen Seitenschwader_Hinterer Kreisel_Bild @ 243\mod_1395735954775_78.docx @ 1905913 @  @ 1 

 

2

SW9070127

Fig. 60 

Pos: 40.16.9 /BA/Einstellungen/Schwader/Höhe der Vorgewendestellung einstellen Seitenschwader_Hinterer Kreisel_Text @ 246\mod_1396338374965_78.docx @ 1921546 @  @ 1 

 

The height of headland position is set by adjusting the timing disc (2). 
To do this: 
• 

Loosen the screws on the timing disc (2). 

• 

Move timing disc in the oblong holes. 

Moving the timing disc anti-clockwise: larger height of the swing outriggers in headland 
position. 
Moving the timing disc clockwise: lower height of the swing outriggers in headland 
position. 

Pos: 40.17 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TS 620





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands