manualshive.com logo in svg

Krone Swadro TS 620, Original Operating Instructions

Share
Download
Krone Swadro TS 620 Original Operating Instructions Download Page 76

Operation

 

 

76 

 

Pos: 38.11.1 /Überschriften/Überschriften 2/U-Z/ZZinkenarme in Arbeitstellung schwenken @ 2\mod_1202709358751_78.docx @ 59873 @ 2 @ 1 

 

10.3 

Swivel tine arms to working position.  

Pos: 38.11.2 /BA/Sicherheit/8. Voraussetzungen/Handlungsanweisung für alle Maschinen/Handlungsanweisung: Maschine stillsetzen und sichern @ 274\mod_1404365253849_78.docx @ 2065151 @  @ 1 

 

• 

Shut down and safeguard the machine, see chapter Safety -> Safety routines, "Shutting 
down and safeguarding the machine". 

Pos: 38.11.3 /BA/Bedienung /Schwader/Zinkenarme in Arbeitsstellung schwenken - Zugfeder lösen Swadro TS 620_680_740 (Twin) @ 359\mod_1439216112485_78.docx @ 2663423 @  @ 1 

 

SW9070082

1

2

3

3

1

 

Fig. 39 
• 

Lower outrigger arms into working position. 

• 

Switch off tractor and secure it against rolling away. 

• 

Loosen the tension spring (1) from the tine (2) (also loosen rotor locking device, if 
necessary) and hinge it in the fastening hole (3). 

Pos: 38.11.4 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TS 620





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands