manualshive.com logo in svg

Krone Swadro TS 620, Original Operating Instructions

Share
Download
Krone Swadro TS 620 Original Operating Instructions Download Page 80

Operation

 

 

80 

 

Pos: 38.15.5 /BA/Bedienung /Schwader/Schwadtuch/Hinteres Schwadtuch einstellen_Längsrichtung_SW 807-1, 808-1, 809-1, 810-1 @ 152\mod_1362646542595_78.docx @ 1354605 @  @ 1 

 

SW9070079

3

3

 

Fig. 43 
 

 

 

Setting the swath cloth in the longitudinal direction 
 

This adjustment is required if forage falls out at the front of the swath former. 
•  Loosen the screws (3). 
• 

Move the swath cloth 

to the desired position. 

•  Tighten the screws (3). 
 

Pos: 38.15.6 /BA/Bedienung /Schwader/Schwadtuch/Hinteres Schwadtuch einstellen_Höhe_TS 620 (Twin), TS 680 (Twin), TS 740 (Twin) @ 250\mod_1396942858862_78.docx @ 1936310 @  @ 1 

 

Setting the height of the swath cloth 
 

The adjustment is required if forage falls for example under 

the swath cloth and is not evened 

out by the rotor height adjustment. 

•  Loosen the screws (3). 
• 

Move the swath cloth 

to the desired height. 

•  Tighten the screws (3). 
 

Pos: 38.16 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TS 620





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands