manualshive.com logo in svg

Krone Swadro TS 620, Original Operating Instructions

Share
Download
Krone Swadro TS 620 Original Operating Instructions Download Page 103

 

Maintenance

 

103 

 

Pos: 42.1 /Überschriften/Überschriften 1/U-Z/Wartung @ 0\mod_1199883581050_78.docx @ 36685 @ 1 @ 1 

 

12 Maintenance 

 

Pos: 42.2 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der grundlegenden Sicherheitshinweise alte Form @ 254\mod_1397485793575_78.docx @ 1953347 @  @ 1 

 

 

WARNING! 
If the basic safety instructions are not followed, people may be seriously injured or 
killed.  

• 

To avoid accidents, the basic safety instructions in the chapter Safety must have been 
read and followed, see chapter Safety "Basic safety instructions". 

 

Pos: 42.3 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der Sicherheitsroutinen alte Form @ 273\mod_1404117435996_78.docx @ 2058712 @  @ 1 

 

 

WARNING! 
If the safety routines are not adhered to, people may be seriously injured or killed.  

• 

To avoid accidents, the safety routines in the chapter Safety must be read and followed, 
see chapter Safety "Safety routines". 

 

Pos: 42.4 /Überschriften/Überschriften 2/A-E/EErsatzteile @ 0\mod_1196782991234_78.docx @ 14927 @ 2 @ 1 

 

12.1 

Spare Parts  

Pos: 42.5 /BA/Sicherheit/7. Gefahrenhinweise alt/Mähwerke/WARNUNG - Verwendung von nicht zugelassenen Ersatzteilen @ 308\mod_1417011577394_78.docx @ 2392925 @  @ 1 

 

 

Warning! - Using non-approved spare parts. 

Effect: Danger to life, serious injuries or loss of warranty claims as well as exclusion of liability 
• 

Use only authentic KRONE spare parts and accessories authorised by the manufacturer. 
The use of spare parts, accessories or additional equipment not manufactured, tested or 
approved by KRONE will exclude any liability for consequential damage. 

 

Pos: 42.6 /BA/Wartung/Hinweis Verschleiß verringern @ 0\mod_1199953505303_78.docx @ 37204 @  @ 1 

 

 

 

 

 

Note 

To ensure problem-free operation of the machine and to reduce wear and tear, specific 
maintenance and upkeep intervals must be observed. These include cleaning, greasing, 
lubricating and oiling parts and components. 

 

Pos: 42.7 /Überschriften/Überschriften 2/A-E/EEntlastungsfeder(n) @ 2\mod_1203508983876_78.docx @ 66384 @ 2 @ 1 

 

12.2 

Compensation Spring(s)  

Pos: 42.8 /BA/Sicherheit/7. Gefahrenhinweise alt/Mähwerke/Gefahr - Einstellung an den Entlastungsfedern @ 0\mod_1196751594562_78.docx @ 12575 @  @ 1 

 

 

Danger! - Setting on the compensation springs 

Effect: Danger to life or serious injuries 
• 

The compensation springs must only be removed in transport position. In the working 
position the compensation springs are subject to high tensile stress. 

• 

Severe injury can be caused if the compensation springs are removed while in the working 
position. 

• 

The lower threaded blocks on the compensation springs must be fully screwed in. 

 

Pos: 42.9 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TS 620





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands