manualshive.com logo in svg

Krone Swadro TS 620, Original Operating Instructions

Share
Download
Krone Swadro TS 620 Original Operating Instructions Download Page 123

 

Maintenance - hydraulic system

 

123 

 

Pos: 42.34.1 /Überschriften/Überschriften 1/U-Z/Wartung - Hydraulik @ 2\mod_1203057943713_78.docx @ 64474 @ 1 @ 1 

 

14 

Maintenance - hydraulic system  

Pos: 42.34.2 /BA/Sicherheit/2. Vorangestellte WarnhinweiseWarnung - Flüssigkeiten unter Druck / Umgang mit Leckagen @ 452\mod_1463484012965_78.docx @ 3073681 @  @ 1 

 

 

WARNING! 
Risk of injury from incorrect handling of liquids under high pressure. Escaping high-
pressure liquids may penetrate the skin and cause serious injury.  

• 

Repair work on the hydraulic system may only be performed by authorised KRONE 
professional workshops. 

• 

Depressurise the system before disconnecting lines. 

• 

When working on the hydraulic system, wear personal protective equipment (protective 
goggles and protective gloves). 

• 

High-pressure liquid that is escaping from a small opening is virtually invisible. Therefore 
use a piece of cardboard or something similar when searching for leaks.  

• 

If liquid penetrates the skin, consult a doctor immediately. The liquid must be removed from 
the body as quickly as possible. Danger of infection! Physicians who are not familiar with 
this area must consult appropriate information from a competent medical source. 

• 

Check the hydraulic hoses at regular intervals and replace them if damaged or worn! Only 
original KRONE spare parts are permitted to be used as replacement lines as they 
correspond to the technical requirements of the manufacturer. 

• 

Before the pressure in the system builds up again, ensure that all line connections are tight.

 

Pos: 42.34.3 /BA/Sicherheit/Hydraulik/WARNUNG - Hydraulikschlauchleitungen unterliegen einer Alterung @ 256\mod_1397735975770_78.docx @ 1965100 @  @ 1 

 

 

WARNING! – Hydraulic hose lines are subject to ageing 

Effect: Danger to life or serious injuries 
The characteristics of the lines change depending on pressure, heat load and the effect of UV 
rays.  
The date of manufacture appears on the hydraulic hoses. This way the age can be ascertained 
quickly.  
By law the hydraulic lines must be replaced after six years. 
Use original spare parts when replacing hydraulic hoses! 

 

Pos: 42.35 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TS 620





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands