manualshive.com logo in svg

Krone Swadro TS 620, Original Operating Instructions

Share
Download
Krone Swadro TS 620 Original Operating Instructions Download Page 33

 

Safety

 

33 

 

Pos: 18.44.14.1 /Überschriften/Überschriften 3/U-Z/Überlastsicherung @ 172\mod_1370928212673_78.docx @ 1483005 @ 3 @ 1 

 

3.6.5 Overload 

protection 

 

Pos: 18.44.14.2 /BA/Bedienung /Schwader/Überlastsicherung/Hinweis Überlastsicherung nicht verändern @ 2\mod_1202465626026_78.docx @ 59586 @  @ 1 

 

 

Note 

The overload protection must not be changed. The guarantee becomes invalid if an overload 
protection is used other the protection provided! 

 

 

Pos: 18.44.14.3 /Überschriften/Zwischenüberschriften/K-OLinke Maschinenseite_ @ 234\mod_1394028416724_78.docx @ 1863542 @  @ 1 

 

Left-hand side of the machine 

Pos: 18.44.14.4 /BA/Bedienung /Schwader/ÜberlastsicherungÜberlastsicherung Bild Swadro TS 620 (Twin)_TS 680 (Twin)_TS 740 (Twin)_linke MS @ 306\mod_1416228737551_78.docx @ 2379704 @  @ 1 

 

1

SW9070073_2

Fig. 7 

Pos: 18.44.14.5 /Layout Module /----------------Leerzeile 5 Pt.-------------------- @ 120\mod_1342592918145_0.docx @ 1092566 @  @ 1 

 

 

Pos: 18.44.14.6 /Überschriften/Zwischenüberschriften/P-TRechte Maschinenseite_ @ 234\mod_1394028543578_78.docx @ 1863571 @  @ 1 

 

Right-hand side of the machine 

Pos: 18.44.14.7 /BA/Bedienung /Schwader/Überlastsicherung/Überlastsicherung Bild Swadro TS 620 (Twin)_TS 680 (Twin)_TS 740 (Twin)_rechte MS @ 246\mod_1396354908076_78.docx @ 1923130 @  @ 1 

 

1

SW9070095

Fig. 8 

Pos: 18.44.14.8 /Layout Module /----------------Leerzeile 5 Pt.-------------------- @ 120\mod_1342592918145_0.docx @ 1092566 @  @ 1 

 

 

Pos: 18.44.14.9 /BA/Bedienung /Schwader/Überlastsicherung/Überlastsicherung_Zwischentext @ 246\mod_1396356068839_78.docx @ 1923259 @  @ 1 

 

Overload protection (1) 

Pos: 18.44.14.10 /BA/Bedienung /Schwader/Überlastsicherung/Überlastsicherungen am Hauptgetriebe Text @ 134\mod_1350633091118_78.docx @ 1190223 @  @ 1 

 

The star ratchet couplings of the overload protection systems can also engage if the speed is 
low or when approaching the rotors. A vibrating noise results. The torque is then transferred by 
pulsation. The brief engaging of the star ratchet couplings does not affect the function of the 
machine. To prevent an early wear of the overload protection system, switch of the P.T.O. shaft 
if the vibrating noise can be heard for a longer duration. 
 

Pos: 18.44.14.11 /BA/Bedienung /Schwader/Überlastsicherung/Hinweis auf Position der Überlastsicherung achten @ 307\mod_1416409501993_78.docx @ 2385279 @  @ 1 

 

 

Note 

Make sure that the overload protection (1) is positioned as shown in the figures. 

 

Pos: 20 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TS 620





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands