10
Settings
10.1
Setting the cutting height
60
EasyCut B 870 CV Collect
Original Operating Instructions 150000707_01_en
10
Settings
WARNING
Risk of injury due to non-observance of relevant safety instructions
If the relevant safety instructions are not observed, persons may be seriously injured or killed.
To avoid accidents, the relevant safety instructions must be read and observed,
WARNING
Risk of injury due to non-observance of safety instructions
If the relevant safety routines are not observed, persons may be seriously injured or killed.
The safety routines must be read and observed to avoid accidents,
.
10.1
Setting the cutting height
KMG000-035
The cutting height is adjusted via the top link (1).
Setting range of cutting height, .
ü
The support jack/the support jacks are swivelled down,
.
ü
The machine is in the working position,
.
Lower the machine up to the support jack/(s).
Shut down and safeguard the machine,
.
Turn the top link until the cutting height is set.
ð
Top link longer = greater cutting height
ð
Top link shorter = smaller cutting height
Swivel the support jack/(s) up,
.
For version with “high-cut skids”
The cutting height can be increased by means of high-cut skids.