Krone EasyCut B 870 CV Collect, Original Operating Instructions

Page: 95 / 122

Maintenance - Cutterbar 14
Checking oil level 14.8
EasyCut B 870 CV Collect
Original Operating Instructions 150000707_01_en 95
KM000-284
„
Observe the safety routine “Safely performing oil level check, oil change and filter element
change”,
refer to page 25 .
„
Shut down and safeguard the machine, refer to page 24 .
Aligning cutterbar in transverse direction (direction of travel)
„ Place the spirit level (1) diagonally on the cutterbar.
„
Align the cutterbar using the spirit level (1) and readjust, if necessary, via cutting height
setting,
refer to page 60 .
Aligning the cutterbar in longitudinal direction
„
Place the spirit level (1) on two cutting discs.
„ Align the cutterbar using the spirit level (1); align it horizontally using wedges, if necessary.
Checking oil level
KM000-036
„
Release the locking screw of the inspection hole (1).
ð The oil level must reach up to the inspection hole (1).
If the oil reaches the inspection hole (1):
„
Mount the locking screw of the inspection hole (1), refer to page 76 .
If the oil does not reach the inspection hole (1):
„
Top up new oil via the inspection hole (1) up to the inspection hole (1).
„
Mount the locking screw of the inspection hole (1), refer to page 76 .