Krone EasyCut B 870 CV Collect, Original Operating Instructions

Page: 81 / 122

Maintenance - Hydraulic System 12
Hydraulic oil tank 12.2
EasyCut B 870 CV Collect
Original Operating Instructions 150000707_01_en 81
12.2 Hydraulic oil tank
KMG000-029
INFORMATION
The oil level must be checked and the oil must be changed in working position and with
machine in horizontal position.
Check oil level
„
Thoroughly clean the area around the oil dipstick (1).
„
Pull out the oil dipstick (1), clean and push in all the way. Use a lint-free cloth to clean the oil
dipstick.
„
Pull out the oil dipstick (1) and check the oil level.
ð
If the oil level is indicated between the "min." and "max." marks:
„ Push in the oil dipstick (1).
ð
If the oil level is indicated below the "min." mark:
„
Refill the oil above the filling hole.
„
Check the oil level.
Change oil
ü A suitable container is available for escaping oil.
„
Turn out the oil dipstick (1).
„ Unscrew the oil drain plug (2) and drain the oil.
„
Screw in the drain plug (2), tightening torque refer to page 76 .
„
Fill in new oil through the filling hole.
„ Check the oil level.