Settings
10
Increasing/reducing ground pressure
10.4
EasyCut B 870 CV Collect
Original Operating Instructions 150000707_01_en
63
10.4
Increasing/reducing ground pressure
KMG000-039
The relief springs (1) are used to adapt the ground pressure of the cutterbar to the local
conditions. In order to protect the sward, the cutterbar must be relieved to such an extent that it
does not jump when mowing or leave any traces of abrasion on the ground.
ü
The machine is shut down and safeguarded,
.
Loosen the counter nut (5).
WARNING! Risk of injury caused by relief spring tearing off!
Never
unscrew the threaded spindles (2) of the relief springs (1) further than the
dimension X
=
80 mm.
To increase the ground pressure, increase the dimension X.
To reduce the ground pressure, reduce the dimension X.
Tighten the counter nut (5).
Set the dimension X in the same way on all relief springs.
10.5
Setting the side guards
KMG000-078
