Krone EasyCollect 6000 FP Operating Instructions Manual Download Page 95

Page: 95 / 124

Maintenance

Pos : 27.34.5 /WH B/Wartung/Eas yCollect 6000/7500/9000/Abbildung Öl wec hs el Verteilergetreibe @ 15\mod_1233046428509_78.doc @ 177578

EC200340

Fig. 71:

Pos : 27.34.6 /WH B/Wartung/Eas yCollect 6000/7500/9000/Öl wec hsel am Verteil ergetriebe/Winkelgetri ebe @ 9\mod_1219836567405_78.doc @ 123787

Oil change

•

For time intervals, see Chapter "Oil Level Check and Oil Change Intervals (Gearboxes)".

•

Remove the gear skid (4) by loosening the screw connections (5).

•

Unscrew the oil drain plug (3) on the gearbox (1). Collect the used oil in a suitable
container.

• Screw in the oil drain plug (3) again.
•

Unscrew the oil level control screw (2) on the gearbox (1) and top up the oil.

•

Screw in the oil level control screw (2) again.

•

Install the gear skid (4).

Pos : 27.34.7 /BA/Wartung/Öl kontrolle_Wechsel/Ölqualität /Ölmenge: siehe Kapitel @ 0\mod_1197007859486_78.doc @ 15531

Oil quality / oil quantity: see Chapter "Filling Quantities and Lubricant Designations for
Gearboxes"

Pos : 27.34.8 /BA/Wartung/Öl kontrolle_Wechsel/Altöl ordnungsgemäß entsorgen @ 0\mod_1197008117002_78.doc @ 15550

Note

The used oil must be disposed of correctly

Pos : 27.35 /BA/-----Seitenumbruc h------ @ 0\mod_1196175311226_0.doc @ 4165

Summary of Contents for EasyCollect 6000 FP





























































































































Search results

Summary of Contents for EasyCollect 6000 FP

Reviews:

Krone EasyCollect 6000 FP, Operating Instructions Manual, Page: 95 / 124

Search results

Summary of Contents for EasyCollect 6000 FP

Reviews: