Krone EasyCollect 6000 FP Operating Instructions Manual Download Page 31

Page: 31 / 124

Start-up -CLAAS

Pos : 14.27 /Ü berschriften/Ü berschriften 2/A-E/Ankuppel n @ 16\mod_1233156207726_78.doc @ 180144

4.7

Coupling

Pos : 14.28 /BA/Inbetri ebnahme/Vors ätz e/M aisgebiss/C LAAS/T ype 491,492 @ 16\mod_1235567555854_78.doc @ 198943

4.7.1

Type 491, type 492

Pos : 14.29 /BA/Inbetri ebnahme/Vors ätz e/M aisgebiss/C LAAS/Ankuppeln CLAAS T ype 491,492 T 1 @ 16\mod_1233156349288_78.doc @ 180169

ECF00003_2

Fig. 12:

•

Move the forage harvester up to the maize header so that the feed drive housing (1) of
the forage harvester is directly in front of the adapter frame (2).

•

Lower the feed drive housing until the holding bracket (3) is positioned under the
receiving pockets (4) of the maize header.

•

Move the forage harvester forward until the holding bracket (3) catches in the openings
(5) of the holder (4).

•

Raise the feed drive housing with the lifting hydraulics until the lower holders (6) are lying
on the shaft (7) of the feed drive housing.

•

Stop the machine.

•

Align the holders (6) and tighten the screws.

•

Install the lock hook (8).

Note

Check to make certain the feed drive housing is correctly hooked into the
receiving pockets and lower holders.

Pos : 14.30 /BA/-----Seitenumbruc h------ @ 0\mod_1196175311226_0.doc @ 4165

Summary of Contents for EasyCollect 6000 FP





























































































































Search results

Summary of Contents for EasyCollect 6000 FP

Reviews:

Krone EasyCollect 6000 FP, Operating Instructions Manual, Page: 31 / 124

Search results

Summary of Contents for EasyCollect 6000 FP

Reviews: