Settings
81
Pos : 25.7 /BA/Eins tell ung en/Vorsätze/CLAAS/Pendelrahmen s perr en CLAAS/J ohnD eer e/N ew H olland @ 16\mod_1233226310251_78.doc @ 180603
9.6
Block pendulum frame
Fig. 61:
You can block the swinging of the EasyCollect during operation with the locking lever (1).
To do this:
•
Move the EasyCollect to the working position
•
Switch off the forage harvester engine and remove the ignition key.
•
Rotate the locking lever (1) from pos. I (unlocked) to pos. II (locked).
Unlocking is done in reverse order.
Pre-condition:
•
The EasyCollect must be in working position.
•
Switch off the forage harvester engine and remove the ignition key.
•
Rotate the locking lever (1) from pos. II (locked) to pos. I (unlocked).
Pos : 25.8 /BA/Eins tell ung en/Vorsätze/CLAAS/Mi tteneins tell ung C LAAS/J ohnD eer e/N ew H olland @ 16\mod_1233226577329_78.doc @ 180625
9.7
Central adjustment of the EasyCollect to the forage harvester for transport
Fig. 62:
The EasyCollect is set at the factory so that the EasyCollect is always centrally adjusted to the
forage harvester when in transport position.
Attaching of components and use of the EasyCollect might move the EasyCollect when in
transport position.
If this happens, the EasyCollect can be readjusted using the stop screws (1).
Pos : 25.9 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_0.doc @ 4165
Summary of Contents for EasyCollect 6000 FP
Page 123: ......