manualshive.com logo in svg

Krone Big Pack 1270 HS, Original Operating Instructions

Share
Download
Krone Big Pack 1270 HS Original Operating Instructions Download Page 71

 

Driving and Transport

 

71 

 

Pos: 20.8 /Überschriften/Überschriften 3/F-J/Hydraulisch betätigte Rollenschurre @ 25\mod_1244092719994_78.doc @ 254690 

 

6.1.2 

Roller chute hydraulically activated  

Pos: 20.9 /BA/Fahren und Transport/Großpackenpresse/HydraulischRollenschurre Bild 890_1270_1290 HS Baureihe @ 64\mod_1300279489493_78.doc @ 582866 

 

1

BPHS0042

2

 

Fig.32 

Pos: 20.10 /BA/Fahren und Transport/Großpackenpresse/Hydraulisch betätigte Rollenschurre Text @ 17\mod_1236588072917_78.doc @ 205441 

 

• 

Fold in the hydraulically activated roller chute (1) 

 hydraulically 

After it is folded in, make certain that the mechanical 

lock (2) has snapped into place.

 

Pos: 20.11 /BA/Fahren und Transport/Großpackenpresse/Packenschurre in Transportstellung (optional) @ 17\mod_1236588178980_78.doc @ 205465 

 

6.1.3 

Bale chute in transport position (optional)  

 

Fig. 33 
• 

To bring the bale chute into the transport position, the unfolded chute must be folded up 
and secured with the retaining chains (4) 

Pos: 20.12 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_0.doc @ 4165 

Summary of Contents for Big Pack 1270 HS





































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands