KROHNE UFM 600 T ALTOSONIC, Installation And Operating Instructions Manual

Page: 60 / 93

3.2.0 DISPLAY
: set output functions
L.C.display
NOTE: All functions that are programmed to be on display can also
be saved as programmed in function 3.6.3
SEL.COMM.
3.2.1 DISP. FLOW
: Display Flow rate
Determine whether the flow rate should be displayed and if
so, in what sort of units; select a display option using the
key and press to store:
NO DISPLAY :
m3/Sec
:
m3/min :
m3/hr :
Liter/Sec :
Liter/min :
Liter/hr :
US G/Sec : U.S. Gallon per second
US G/min :
US G/hr :
——-/—- : reserved for user defined unit
PERCENT : percentage of full scale as entered
in Start Up menu
3.2.2 DISP. TOTAL
: Display Totalisator
outputs
Select which totalizer outputs should be displayed by using
the key and press to store:
NO DISPLAY : (function 3.2.3 will not appear)
+ TOTAL : Totalizer for positive flow
- TOTAL : Totalizer for negative flow
+/- TOTAL : Totalizers for both positive and
negative flow
SUM TOTAL : [+ TOTAL]- [- TOTAL]
ALL TOTAL : All three totalizer options are active
57