INSTALLATION
2
25
OPTIWAVE 7300 C
www.krohne.com
04/2009 - 4000050002 - QS OPTIWAVE 7300 R05 en
How to remove the signal converter
•
Loosen the housing locking screw
1
with a 5 mm Allen wrench.
•
Remove the housing.
•
Tighten the housing locking screw
1
.
How to attach the signal converter
•
Loosen the housing locking screw
1
with a 5 mm Allen wrench.
•
Attach the housing to the flange system
2
.
•
Tighten the housing locking screw
1
.
2.9.5 How to attach the weather protection to the device
Equipment needed:
•
Device.
•
Weather protection (option).
•
10 mm wrench (not supplied).
The overall dimensions of the weather protection are in "Dimensions and weight" in the
handbook.
•
Loosen the bracket nuts on the weather protection.
•
Remove the bracket.
•
Lower the weather protection onto the device.
•
Turn the weather protection so that the keyhole points forward.
•
Attach the bracket.
•
Lift the weather protection to the top of the housing support pillar.
•
Hold the weather protection in the correct position and tighten the bracket nuts.
Figure 2-23: Installation of the weather protection
QS_OPTIWAVE7300_en_090528_4000050002_R05_web.book Page 25 Friday, May 29, 2009 4:01 PM
