INSTALLATION
2
19
OPTIWAVE 7300 C
www.krohne.com
04/2009 - 4000050002 - QS OPTIWAVE 7300 R05 en
2.9 How to install the device on the tank
2.9.1 How to install a device with a flange connection
Equipment needed:
•
Device
•
Gasket (not supplied)
•
Nuts and bolts (not supplied)
•
Wrench (not supplied)
•
Make sure the flange on the nozzle is level.
•
Make sure that you use the applicable gasket for the flange dimensions and the process.
•
Align the gasket correctly on the flange facing of the nozzle.
•
Lower the antenna carefully into the tank.
•
Tighten the flange bolts.
i
Refer to local rules and regulations for the correct torque to apply to the bolts.
Requirements for flange connections
Figure 2-16: Flange connection
QS_OPTIWAVE7300_en_090528_4000050002_R05_web.book Page 19 Friday, May 29, 2009 4:01 PM