4
START-UP
32
OPTIWAVE 7300 C
www.krohne.com
04/2009 - 4000050002 - QS OPTIWAVE 7300 R05 en
4.3.4 How to start the device
•
Connect the converter to the power supply.
•
Energize the converter.
i
After 30 seconds the screen will display "booting up", "starting up" and then the default
screen will appear.
•
The device will display readings.
i
Measurements agree with specifications given in the customer order.
4.4 Remote communication with PACTware
™
PACTware
™
displays measurement information clearly and lets you configure the device from a
remote location. It is an Open Source, open configuration software for all field devices. It uses
Field Device Tool (FDT) technology. FDT is a communication standard for sending information
between the system and the field device. This standard agrees with IEC PAS 62453. Field devices
are easily integrated. Installation is supported by a user-friendly Wizard.
Install these software programs and equipment:
•
Microsoft
®
.NET Framework version 1.1 or later.
•
PACTware.
•
HART
®
converter (USB, RS232...).
•
The Device Type Manager for the device.
The software and installation instructions are given on the CD-ROM supplied with the device.
You can also download the latest version of PACTware
™
and the DTM from our internet site.
Refer also to the PACTware
™
consortium site at http://www.pactware.de.
CAUTION!
If the manufacturer received information about the installation, the device will display readings
correctly. If not, refer to the quick setup procedures.
QS_OPTIWAVE7300_en_090528_4000050002_R05_web.book Page 32 Friday, May 29, 2009 4:01 PM
