OPERATION
6
107
IFC 300
www.krohne.com
06/2009 - 4000069802 - MA IFC 300 R03 en
No.
Function
Settings / descriptions
C4 I/O HART
C4
I/O HART
Selection / display of the 4 dynamic variables (DV) for HART
®
.
The HART
®
current output (terminal A basic I/Os or terminal 0160C modular
I/Os) always has a fixed link to the primary variables (PV). Fixed links of the
other DVs (1-3) are only possible if additional analog outputs (current and
frequency) are available; if not, the measurement can be freely selected
from the following list: in Fct. A4.1 "measurement".
stands for 1, 2, 3 or 4
X stands for connection terminals A...D
C4.1
PV is
Current output (primary variable)
C4.2
SV is
(secondary variable)
C4.3
TV is
(tertiary variable)
C4.4
4V is
(4th variable)
C4.5
HART units
Unit change of DVs (dynamic variables) in the display; usually varied
break: return with
^
key
HART display
®
: copies the settings for the units to the settings for DVs
Standard: factory settings for DVs
C4.
.1
current output X
Shows the current analog measured value of the linked current output. The
measurement cannot be changed!
C4.
.1
frequency output X
Shows the current analog measured value of the linked frequency output, if
present. The measurement cannot be changed!
C4.
.1
HART dynamic var.
Measurements of the dynamic variables for HART
®
.
Linear measurements: volume flow / mass flow / diagnosis value / flow
speed / coil temperature / conductivity
Digital measurements: counter 1 / counter 2 / counter 3 / operating hours
No.
Function
Settings / descriptions
C5 device
C5.1 device info
C5.1
device info
C5.1.1
Tag
Settable characters (max. 8 digits):
A
…
Z; a
…
z; 0
…
9; / - , .
C5.1.2
C number
CG number, non-alterable (input/output versions)
C5.1.3
device serial no.
Serial no. of the system.
C5.1.4
electronic serial no.
Serial no. of the electronic assembly, cannot be changed.
C5.1.5
SW.REV.MS
Serial no. of the circuit board, version no. of the main software, production
date of the circuit board
C5.1.6
Electronic Revision ER
Shows ID no., electronic revision no. and production date;
Contains all hardware and software changes.
.book Page 107 Wednesday, June 10, 2009 4:20 PM
