14
1.9 STAINLESS STEEL SLIDE ON WHEELS (FA 20 700 00)
The trolley travels up and down the rail, accompanying the user as he or she moves along the System. It must be connected to the harness’s sternal
attachment point with a connector (FA 50 101 17).
In the event of a fall, the trolley immediately stops on the rail, thus stopping the fall.
It has a unidirectional locking system that prevents it from sliding to the bottom on its own when it is not in use.
Weight: 0.600 kg
Material: 316 stainless steel slide, brass wheels.
Installation :
•
Insert the trolley at the bottom end of the rail. Press on the bottom stop and pass the slide over the top. Make sure that the arrow etched on
the slide is pointing up.
•
Once the trolley is inserted onto the rail, the bottom stop returns to its initial position, preventing the trolley from coming off the rail.
•
The system has a directional fail-safe device composed of two parts: a safety locking pin on the trolley, which is blocked by the L clamp located
the bottom of the lower end of the rail if the slide is inserted in the wrong direction (Fig. 8)
1.10 WARNING SIGN
The sign provided must be installed in a visible location in the area where the ladder is accessed.
This sign is mandatory. The various fields must be filled in.
An identification number allows you to identify your different installations so that you can monitor them.
1 : Anchorage point
2 : Fall indicator slot
3 : Cam spring
4 : Safety rod
5 : Wheels (x4)
6 : Attachment cam
7 : Body
Fig. 8
GB
a
a
b
b
c
b
a- L-clamp
b- Bottom stop
c- Trolley
