11
1.3 ALUMINIUM RAIL EXTREMITY (FA 20 703 01)
for KS8000
/ (FA 20 703 00)
for KS9000
The aluminium rail extremity has a spring-loaded retractable termination that prevents the slide from accidentally slipping off the rail, and an L clamp that
prevents the slide from being inserted in the wrong direction.
Standard length: 3 m.
Weight: 4.10 kg.
Material : Aluminium
Tools needed: 19 mm spanner wrench.
Installation
Aluminium rail extremity FA 20 703 01
-
KS8000 only
:
•
The bottom edge of the lower rail must be placed about 15 cm from the ground (Fig. 3), in such a way as to
facilitate insertion of the trolley (FA 20 700 00).
•
Affix the rail to the ladder with the Rung clamp (FA 20 705 00). See § 1.5.
•
The first fastener on the ladder rung must be about 30 cm from the bottom of the lower rail.
•
Then, maintain a spacing of about 150 cm between each fastening accessory.
Measurements are given as a guide and depend on the ladder on which the KS8000 is being installed.
Tightening torque: max.42 N/m
Aluminium rail extremity FA 20 703 00
–
KS9000 only
:
•
The bottom edge of the lower rail must be placed about 15 cm from the ground (Fig. 3), in such a way as to facilitate insertion of the trolley
(FA 20 700 00).
•
The first mounting bracket (FA 20 706 00; see § 1.4) must be placed about 30 cm from the bottom of the lower rail.
•
Then, maintain a spacing of at least 150 cm between each fastening accessory.
•
Measurements are given as a guide and depend on the structure on which the KS9000 is being installed.
Fig. 3
1: Bottom of Aluminium rail extremity
2: Retractable termination
3: Hexagonal Nut
4: Hexagonal Screw
5: Left-hand torsion spring
6: Non-inverting system
TOP
BOTTOM
Fig. 4
GB
Fig.3
