![background image](http://html1.mh-extra.com/html/kramer/vw-16/vw-16_user-manual_2001773017.webp)
Kramer Electronics Ltd.
VW-16
– Operating and Controlling VW-16
15
To configure the HDCP setting:
1. On the front panel press
MENU
. The menu shows.
2. Select
SYSTEM
>
HDCP SETTING
press
Enter
and set the HDCP setting parameters
based on the information in the following table:
Menu Item
Function
Input 1
ON/OFF
Set HDCP support on HDMI 1 to HDMI 4 inputs to ON (default) or
OFF. Note that: 1. HDCP must be enabled (ON) to support HDCP
encrypted sources. 2. Sources such as Mac computers always
encrypt their outputs when detecting that the sink supports HDCP.
If the content does not require HDCP, you can prevent these
sources from encrypting by disabling (OFF) HDCP on the input.
Input 2
ON/OFF
Input 3
ON/OFF
Input 4
ON/OFF
The HDCP settings are configured.
To configure the network settings:
1. On the front panel press
MENU
. The menu shows.
2. Select
SYSTEM
>
NETWORK SETTING
press
Enter
and set the network setting
parameters based on the information in the following table:
Menu Item
Function
Ethernet Type
Select Ethernet type STATIC or DHCP.
IP Address
Indicates the systems current IP address.
For TCP/IPv4 you can use any IP address in the range 192.168.1.1 to
192.168.1.255 (excluding 192.168.1.39.
Default: 192:168:001:039.
Mask
255:255:255:000
Gateway
000:000:000:000
The network settings are configured.
To configure the OSD setting:
1. On the front panel press
MENU
. The menu shows.
2. Select
SYSTEM
>
OSD SETTING
press
Enter
and set the OSD setting parameters
based on the information in the following table:
Menu Item
Function
H Offset
0-100
V Offset
0-100
Transparency
0-4
IDENT. Timeout
OFF/5-50
MENU. Timeout
OFF/5-50
INFO. Timeout
OFF/5-50
INFO. Display
ON/OFF
The OSD settings are configured.