![background image](http://html1.mh-extra.com/html/kramer/vw-16/vw-16_user-manual_2001773015.webp)
Kramer Electronics Ltd.
VW-16
– Operating and Controlling VW-16
13
Configuring the Multi-Viewer
To set the audio source:
1. On the front panel press
MENU
. The menu shows.
2. Select
MULTI-VIEWER
>
AUDIO SOURCE
press
Enter
and define the audio source
parameters based on the information in the following table:
Menu Item
Function
INPUT 1
– INPUT 4
Connect the speaker or amplifier to the stereo audio terminal block
connectors to
VW-16
via the stereo audio cable.
The multi-viewer aspect ratio is set.
To configure the color settings:
1. On the front panel press
MENU
. The menu shows.
2. Select
MULTI-VIEWER
>
COLOR SETTING
press
Enter
and define the color setting
parameters based on the information in the following table:
Menu Item
Function
Brightness
Adjust Brightness value between 0 ~ 100.
Contrast
Adjust Contract value between 0 ~ 100.
Hue
Adjust Hue value between 0 ~ 100.
Saturation
Adjust Saturation value between 0 ~ 100.
The multi-viewer color setting is configured.
To configure the layout settings:
1. On the front panel press
MENU
. The menu shows.
2. Select
MULTI-VIEWER
>
LAYOUT SETTING
press
Enter
and define the layout setting
parameters based on the information in the following table:
Menu Item
Function
1-3 x PiP
Sets the multi-viewer mode to present 1, 2, or, 3 PiP windows over a
parent picture in the video all.
Quad Split
Sets the source to output for each monitor. Set up each monitor 1, 2, 3, 4
individually.
Custom 1-7
Set the position and size of the windows of each custom screen layout
from Custom1 to Custom 7.
Single Picture
The video of one source is only presented over the video wall.
The multi-viewer layout settings are configured.