![background image](http://html1.mh-extra.com/html/kramer/vw-16/vw-16_user-manual_2001773048.webp)
Kramer Electronics Ltd.
VW-16
– Protocol 3000
46
Function
Description
Syntax
Parameters/
Attributes
Example
MUTE-ANA
Set analog output
settings.
COMMAND
#MUTE-ANA
channel
,
mute_mode
<CR>
FEEDBACK
~nn@MUTE-ANA
channel
,
mute_mode
<CR><LF>
channel
– * (All)
mute_mode
– 0 – off unmute, 1 – on
mute
Set analog output
settings:
#MUTE-ANA
*
,
1
<CR>
MUTE-ANA?
Get analog output
settings.
COMMAND
#MUTE-ANA?
channel
<CR>
FEEDBACK
~nn@MUTE-ANA
channel
,
mute_mode
<CR><LF>
channel
– * (All)
mute_mode
– 0 – off unmute, 1 – on
mute
Get analog output
settings:
#MUTE
<CR>
NET-DHCP
Set DHCP mode.
Only 1 is relevant for
the mode value. To
disable DHCP, the user
must configure a static IP
address for the device.
Connecting Ethernet to
devices with DHCP may
take more time in some
networks.
To connect with a
randomly assigned IP by
DHCP, specify the device
DNS name (if available)
using the
NAME
command.
You can also get an
assigned IP by direct
connection to USB or RS-
232 protocol port, if
available.
For proper settings
consult your network
administrator.
For Backward
compatibility, the
id
parameter can be omitted.
In this case, the Network
ID, by default, is 0, which
is the Ethernet control
port.
COMMAND
#NET-DHCP
netw_id
,
dhcp_state
<CR>
FEEDBACK
~nn@NET-DHCP
netw_id
,
dhcp_state
<CR><LF>
netw_id
– Network ID–the device
network interface (if there are more than
one). Counting is 0 based, meaning the
control port is ‘0’, additional ports are
1,2,3….
dhcp_state
–
1
– Try to use DHCP. (If unavailable,
use the IP address set by the
factory or the
net-ip
command).
Enable DHCP mode for
port 1, if available:
#NET-DHCP
1
,
1
<CR>
NET-DHCP?
Get DHCP mode.
For Backward
compatibility, the
id
parameter can be omitted.
In this case, the Network
ID, by default, is 0, which
is the Ethernet control
port.
COMMAND
#NET-DHCP?
netw_id
<CR>
FEEDBACK
~nn@NET-DHCP
netw_id
,
dhcp_mode
<CR><LF>
netw_id
– Network ID–the device
network interface (if there are more than
one). Counting is 0 based, meaning the
control port is ‘0’, additional ports are
1,2,3….
dhcp_mode
–
0
– Do not use DHCP. Use the IP set
by the factory or using the
net-ip
or
net-config
command.
1
– Try to use DHCP. If unavailable,
use the IP set by the factory or
using the
net-ip
or
net-config
command.
Get DHCP mode for port
1:
#NET-DHCP?
1
<CR>
NET-GATE
Set gateway IP.
A network gateway
connects the device via
another network and
maybe over the Internet.
Be careful of security
issues. For proper
settings consult your
network administrator.
COMMAND
#NET-GATE
ip_address
<CR>
FEEDBACK
~nn@NET-GATE
ip_address
<CR><LF>
ip_address
– Format: xxx.xxx.xxx.xxx
Set the gateway IP
address to 192.168.0.1:
#NET-
GATE
192
.
168
.
000
.
0
01
<CR>
NET-GATE?
Get gateway IP.
A network gateway
connects the device via
another network and
maybe over the Internet.
Be aware of security
problems.
COMMAND
#NET-GATE?
<CR>
FEEDBACK
~nn@NET-GATE
ip_address
<CR><LF>
ip_address
– Format: xxx.xxx.xxx.xxx
Get the gateway IP
address:
#NET-GATE?
<CR>
NET-IP
Set IP address.
For proper settings
consult your network
administrator.
COMMAND
#NET-IP
ip_address
<CR>
FEEDBACK
~nn@NET-IP
ip_address
<CR><LF>
ip_address
– Format: xxx.xxx.xxx.xxx
Set the IP address to
192.168.1.39:
#NET-
IP
192
.
168
.
001
.
039
<CR>
NET-IP?
Get IP address.
COMMAND
#NET-IP?
<CR>
FEEDBACK
~nn@NET-IP
ip_address
<CR><LF>
ip_address
– Format: xxx.xxx.xxx.xxx
Get the IP address:
#NET-IP?
<CR>
NET-MAC?
Get MAC address.
For backward
compatibility, the
id
parameter can be omitted.
In this case, the Network
ID, by default, is 0, which
is the Ethernet control
port.
COMMAND
#NET-MAC?
id
<CR>
FEEDBACK
~nn@NET-MAC
id
,
mac_address
<CR><LF>
id
– Network ID–the device network
interface (if there are more than one).
Counting is 0 based, meaning the
control port is ‘0’, additional ports are
1,2,3….
mac_address
– Unique MAC address.
Format: XX-XX-XX-XX-XX-XX where X
is hex digit
#NET-MAC?
id
<CR>