![background image](http://html1.mh-extra.com/html/kramer/vw-16/vw-16_user-manual_2001773029.webp)
Kramer Electronics Ltd.
VW-16
– Using VW-16 Embedded Webpages
27
Color Settings
VW-16
allows users to adjust the color settings: brightness, contrast, hue, and saturation.
To adjust the color settings:
1. From the Navigation List, select
Multi-Viewer
.
2. Adjust the
Color settings
, move the slider right or left to adjust color (RGB).
a.
Brightness
– adjusts brightness values between 0-100.
b.
Contrast
– adjusts contrast values between -100.
c.
Hue
– adjust hue values between 0-100.
d.
Saturation
– Adjust saturation values between 0-100.
3. Click
Apply
.
The color settings are adjusted.
Layout Settings
There are two mode options to set up the screen layout settings.
Option 1: Pre-Defined Layout Settings
When the screen layout is in
Pre-defined
mode, the settings for Aspect Ratio and Border
Color show for the user to configure.
To use a Pre-defined layout setting:
1. From the Navigation List, select
Multi-Viewer
>
Layout settings
.
2. In Pre-defined, select a Layout. See the table below for a description of each layout
option:
Pre-Defined
Layout A
Video wall mode is the video of one source only is presented over
the video wall.
Layout B
Multiview mode presents 1 PiP window over a parent picture in the
video wall.
Layout C
Multiview mode presents 2 PiP windows over a parent picture in
the video wall.
Layout D
Multiview mode presents 3 PiP windows over a parent picture in
the video wall.
Layout E
Multiview mode presents 4 windows over the video wall.
Note
– In this setting, input sources are fixed to the corresponding
window.