Kramer Electronics Ltd.
VW-16
– Connecting VW-16
8
Connecting the Output to an Unbalanced/Balanced
Stereo Audio Acceptor
The following are the pinouts for connecting the output to a balanced stereo audio acceptor:
Figure 4: Connecting to a Balanced Stereo Audio Acceptor
Connecting to VW-16 via RS-232
You can connect to
VW-16
via an RS-232 connection
using, for example, a PC.
VW-16
features an RS-232 3-pin terminal block connector allowing the RS-232 to control
VW-16
.
Connect the RS-232 terminal block on the rear panel of
VW-16
to
a PC/controller, as follows:
From the RS-232 9-pin D-sub serial port connect:
•
Pin 2 to the TX pin on the
VW-16
RS-232 terminal block
•
Pin 3 to the RX pin on the
VW-16
RS-232 terminal block
•
Pin 5 to the G pin on the
VW-16
RS-232 terminal block
RS-232 Device
VW-16
15