Kramer Electronics Ltd.
VSM-4x4X
– Using Embedded Web Pages
37
Defining Stacked Mode Pictures
You can configure each picture on the screen separately.
To define the picture :
1. Click
next to a Picture or select a Picture A/Picture B/Picture C/Picture D from the
Stacked Layouts list on the left. The Picture Settings window appears.
Figure 38: Stacked Mode
– Stacked Settings Window
2. Set the video source, enable/disable video, set the aspect ratio, enable/disable label, set
the window size, position and alignment, set border color and width, and set the
transparency of the window.
3. Click
RESET TO DEFAULT
to reset settings to factory default.
Picture settings are defined.
Operating and Configuring the PoP Mode
In the PoP mode, one large window and 3 other smaller images, either on the side (side) or
on the lower area of the screen (bottom) are displayed, while maintaining aspect ratio.
Perform the following actions:
•
•
Setting the Inputs and the Outputs
•