Kramer Electronics Ltd.
VSM-4x4X
– Operating VSM-4x4X Via the Front Panel Buttons
12
Figure 6: The VSM-4x4X
Video Wall Operation Mode
Connecting the VSM-4x4X in the Video Wall Operation Mode
Before configuring the video wall, you need to set up a video wall configuration.
Figure 7: Connecting the VSM-4x4X in the Video Wall Operation Mode
To set up a 2x2 video wall :
1. Connect up to 4 HDMI sources (for example, Blu-ray players) to the HDMI INPUT
connectors (1 to 4), not shown in
2. Connect the HDMI output connectors to the video wall screens. Connect the:
▪
OUTPUT A connector to the top left screen.
▪
OUTPUT B connector to the top right screen.
▪
OUTPUT C connector to the bottom left screen.
▪
OUTPUT D connector to the bottom right screen.
3. Connect the power.
4. Press (VIDEO WALL 2x2 button).
Video Wall is configured.
