Kramer Electronics Ltd.
VSM-4x4X
– Using Embedded Web Pages
50
4. Click
CHANGE
.
5. Enter the new password and then confirm password.
6. Click
SAVE
.
Security is enabled and access requires authentication.
Disabling User Access
To enable security:
1. In the Navigation pane, click
Device Settings
. The General tab in the Device Settings
).
Figure 57: Device Settings
– Users Tab
3. Click
Off
next to Security Status to enable web page authentication. The following
message appears.
Figure 58: Security Tab
– Security Status
4. Enter the current password.
5. Click
OK
.
Security is disabled.
