![background image](http://html1.mh-extra.com/html/kramer/vsm-4x4x/vsm-4x4x_user-manual_2001470015.webp)
Kramer Electronics Ltd.
VSM-4x4X
– Operating via Ethernet
13
Operating via Ethernet
You can connect to
VSM-4x4X
via Ethernet using either of the following methods:
•
Directly to the PC using a crossover cable (see
Connecting Ethernet Port Directly to a
•
Via a network hub, switch, or router, using a straight-through cable (see
Ethernet Port via a Network Hub
).
Note
: If you want to connect via a router and your IT system is based on IPv6, speak to your
IT department for specific installation instructions.
Connecting Ethernet Port Directly to a PC
You can connect the Ethernet port of
VSM-4x4X
directly to the Ethernet port on your PC using
a crossover cable with RJ-45 connectors.
This type of connection is recommended for identifying
VSM-4x4X
with the factory configured default IP address.
After connecting
VSM-4x4X
to the Ethernet port, configure your PC as follows:
1. Click
Start
>
Control Panel
>
Network and Sharing Center
.
2. Click
Change Adapter Settings
.
3. Highlight the network adapter you want to use to connect to the device and click
Change
settings of this connection
.
The Local Area Connection Properties window for the selected network adapter appears
as shown in
Figure 8: Local Area Connection Properties Window