![background image](http://html1.mh-extra.com/html/kramer/vsm-4x4x/vsm-4x4x_user-manual_2001470034.webp)
Kramer Electronics Ltd.
VSM-4x4X
– Using Embedded Web Pages
32
Defining Side-by-Side Mode
You can configure each picture on the screen separately.
To define a picture (for example, Picture A):
1. Click
next to Picture A, or select Picture A from the QUAD Layouts list on the left.
The Picture Settings window appears.
Figure 29: Split Screen Mode
– Picture Settings Window
2. Set the video source, enable/disable video, enable/disable label, set the aspect ratio and
set the split position.
3. Click
RESET TO DEFAULT
to reset settings to factory default.
Picture settings are defined.
Operating and Configuring the PiP Mode
In the PiP (Picture-in-Picture) mode, several images are displayed over the background
image. You can select up to 3 images over the background. This section describes the PiP 2
mode but applies to other PiP configurations.
Perform the following actions:
•
•
Setting the Inputs and the Outputs
•
Pictures on page