Kramer Electronics Ltd.
UHD Matrix Switcher
– Using the Embedded Web Pages
36
To switch ARC to an input:
1. In the Navigation pane, click
Switching
. The Switching page appears.
2. Select
Audio break away
tab.
3. Check the ARC check boxes to ARC-enable selected outputs (under the
Audio Outputs
column).
For example, Output 2 and 4 are checked, therefore ARC-enabled so they can be
switched as ARC signals.
Make sure that the acceptor on the output side has ARC capabilities.
Figure 34: Switching Page
– Output 2 and 4 ARC-Enabled
4. Select AFV tab.
5. Select an ARC-functioning input button (1, 3, 5 or 7).
For example, Input 1.
6. Click
on Input 1 and set to
ARC
mode. This input is now ARC-enabled.
Figure 35: Switching Page
– Output 1 Set to ARC Mode