Kramer VS-48UHD, User Manual

Page: 72 / 84

Kramer Electronics Ltd.
UHD Matrix Switcher
– Protocol 3000
70
HDCP-MOD
Functions Permission Transparency
Set:
HDCP-MOD
Administrator Public
Get
HDCP-MOD?
End User Public
Description Syntax
Set: Set HDCP mode
# HDCP-MOD SP inp_id,mode CR
Get: Get HDCP mode
# HDCP-MOD? SP inp_id CR
Response
Set/get:
~nn@ HDCP-MOD SP inp_id,mode CR LF
Parameters
inp_id
– Input number:
1
(IN 1),
2
(IN 2),
3
(IN 3),
4
(IN 4),
5
(IN 5),
6
(IN 6),
7
(IN 7),
8
(IN 8)
mode
– HDCP mode:
0
(HDCP Off),
1
(HDCP On)
Response Triggers
Response is sent to the com port from which the Set (before execution) / Get command was received.
Response is sent to all com ports after execution if
HDCP-MOD
was set by any other external control device
(button press, device menu and similar) or HDCP mode changed.
Notes
Set HDCP working mode on the device input:
•
HDCP supported
– HDCP_ON (default).
•
HDCP not supported
– HDCP OFF.
HDCP supports changes following a detected sink - MIRROR OUTPUT.
K-Config Example
Get the input HDCP-MODE of IN 1 (HDCP Off):
“#HDCP - MOD? 1,0”,0x0D
FPGA-VER
Functions Permission Transparency
Set:
-
- -
Get
FPGA-VER?
End User Public
Description Syntax
Set: - -
Get: Get current FPGA version
# FPGA-VER? SP id CR
Response
~nn@ FPGA-VER SP id,expected_ver,actual_ver CR LF
Parameters
id
–
FPGA ID
expected_ver
– Expected FPGA version for current firmware
actual_ver
– Actual FPGA version
K-Config Example
Get current FPGA version (1):
“#FPGA - VER? 1”,0x0D