Kramer VS-48UHD, User Manual

Page: 8 / 84

Kramer Electronics Ltd.
UHD Matrix Switcher
– Defining the UHD Matrix Switcher
6
# Feature Function
The behavior of the front panel buttons and the 7-segment display changes along with the
operation modes. For further details see
Operating VS-88UHD via Front Panel Buttons on
page Error! Unknown switch argument. .
IN (PATTERN) SELECTOR
Buttons Press to select the input to switch to the output that was previously
selected (also used for storing machine setups in the STO-RCL
modes and for selecting a pattern in the Pattern mode).
In the ARC mode, inputs 1, 3, 5 and 7 can operate as audio outputs
(see
Operating in ARC Mode on page Error! Unknown switch
argument. ).
OUT (MUTE) SELECTOR
Buttons Press to select an output to which the input is routed. Also used for
storing machine presets.
In the ARC mode, each output can operate as an audio input (see
Operating in ARC Mode on page Error! Unknown switch
argument. ).
MUTE/PATTERN Button Press to view the current pattern status and select the output/s to
which a pattern is routed.
Press to mute audio or video on a selected output when D-AUDIO
and/or VIDEO buttons are pressed (lit).
ALL Button Press to perform an action on all outputs (for example setting Mute
mode, Pattern mode and so on).
For switching, press ALL and then a specific IN button to route the
selected input to all outputs. For example, press ALL and then IN 2
to route input 2 to all the outputs.
STO and RCL Buttons Press STO to store the current switching setting to a preset button.
Press RCL to recall the switching setting from a preset button.
ARC Button Press to set ARC mode on the inputs (see Operating in ARC Mode
on page Error! Unknown switch argument. ).
D-AUDIO Button Press to enable digital audio routing. When pressed together with
VIDEO, the digital audio is routed together with the video signal.
VIDEO Button Press to select video inputs. When pressed together with D-AUDIO,
video is switched together with audio.
LOCK Button Press and hold (for about 3 seconds) to toggle locking/releasing of
the front panel buttons.
Press to save the following setups: HDCP (On/Off), ARC, Fast
Switch and Switch mode.
EDID Button Press to capture the EDID.
OUTPUT/INPUT
7-segment LED Display
Displays the selected inputs switched to the outputs (marked above
each input).