Kramer VS-48UHD, User Manual

Page: 15 / 84

Kramer Electronics Ltd.
UHD Matrix Switcher
– Operating VS-88UHD via Front Panel Buttons
13
Operating VS-88UHD via Front
Panel Buttons
Press the power switch to power the device. During the 10-second initialization process,
the:
•
7-segment display LEDs are on.
•
All the front panel buttons illuminate.
•
The FPGA/EPLD version (P), the firmware version (F) and the build version (b) appear
in succession.
Following initialization, the front panel buttons and 7-segment display enter normal operation:
•
The 7-segment display shows the video IN-OUT status.
•
The current operation mode button illuminates ( VIDEO , by default).
•
An illuminated IN (PATTERN) button indicates an active signal connected to the
input.
•
An illuminated OUT (MUTE) button indicates that an acceptor is connected to the
output.
The VS-88UHD front panel buttons enable performing the following functions:
•
Routing the Signals on page Error! Unknown switch argument. .
•
Storing and Recalling a Setup on page Error! Unknown switch argument. .
•
Setting the Switching Mode on page Error! Unknown switch argument. .
•
Setting the Switching Speed on page Error! Unknown switch argument. .
•
Setting HDCP on page Error! Unknown switch argument. .
•
Copying the EDID on page Error! Unknown switch argument. .
Routing the Signals
You can switch the video and the embedded audio signals together (AFV), or switch them
separately, via the following switching modes:
•
Switching the Video and the Audio Signal Simultaneously on page 14 .
•
Switching the Video Signal on page 14 .
•
Routing an Audio Input to the HDMI Output on page 15 .
•
Operating in ARC Mode on page 16 .
•
Muting/Unmuting an Output on page 20 .
•
Routing a Pattern to the Output on page 20 .