![background image](http://html.mh-extra.com/html/kramer/vs-48uhd/vs-48uhd_user-manual_2001379011.webp)
Kramer Electronics Ltd.
UHD Matrix Switcher
– Connecting the VS-88UHD
9
Connecting the VS-88UHD
Although this user manual describes the
VS-88UHD
only, it applies also to
VS-66UHD
,
VS-
84UHD
and
VS-48UHD
except for the number of inputs and outputs per device.
Always switch off the power to each device before connecting it to your
VS-88UHD
. After
connecting your
VS-88UHD
, connect its power and then switch on the power to each
device.
Although this connecting example shows only several inputs and outputs that are
connected, you can connect all the inputs and outputs simultaneously.
To connect the VS-88UHD as illustrated in the example in
, do the following:
1. Connect up to eight video sources to the inputs
(from INPUT1 to INPUT 8). For
example, connect:
▪
Laptops to INPUT 1, 3, 4 and 8 HDMI connectors.
▪
Blu-ray players to the INPUT 2 and INPUT 6 HDMI connectors.
2. Connect the eight video HDMI outputs
(from OUTPUT 1 to OUTPUT 8) to up to eight
acceptors. For example, connect:
▪
OUTPUT 1, 6 and 8 connectors to projectors.
▪
OUTPUT 2, 4, 5 and 7 connectors to OLED displays.
3. Connect the power cord.
We recommend that you use only the power cord that is supplied with this machine.
4. If required, connect:
▪
The 5V/2A USB port
to the USB port of another device to charge it.
▪
The ETHERNET port
to a control device.
Figure 9: Connecting to the VS-88UHD Rear Panel